针对我国高端装备轻量化问题，在新型轻质金属材料的研制和使役行为方面进行前沿探索，主要从事轻质金属结构材料（铝、镁和钛合金等）在力学、化学和物理多因素耦合条件下的使役行为及其性能提升方法研究，具体侧重于材料的力学强度、疲劳、腐蚀疲劳、断裂韧性、腐蚀、应力腐蚀开裂、氢脆和腐蚀各向异性等，建立材料微观失效机制与微观组织表征之间的内在联系，探究可显著提升材料使役性能的合金化、机械大变形和后续热处理等方法。

1.B.J. Wang, D.K. Xu*, X.Q. Zhuang, L.Y. Sheng. Inhibiting effect of I-phase formation on the plastic instability of the duplex structured Mg-8Li-6Zn-1.2Y (in wt.%) alloy. Journal of Magnesium and Alloys. (2021) doi.org/10.1016/j.jma.2021.08.030.
2.S.D. Wang, M.Y. Wu, D.K. Xu, En-hou Han. Improving corrosive wear resistance of Mg-Zn-Y-Zr alloys through heat treatment. Journal of Magnesium and Alloys. (2021) doi.org/10.1016/j.jma.2021.08.011.
3.Changjian Yan, Yunchang Xin, Xiao-Bo Chen, Daokui Xu*, Paul K. Chu, Chaoqiang Liu, Bo Guan, Xiaoxu Huang, Qing Liu. Evading strength-corrosion tradeoff in Mg alloys via dense ultrafine twins. Nature Communications. 12 (2021) 4616.
4.S. Wang, D.K. Xu*, Z.Q. Zhang, Y.J. Ma, Y.X. Qiao, Effect of electrochemical hydrogen charging on the mechanical behavior of a dual-phase Ti-4Al-2V-1Mo-1Fe (in wt.%) alloy. Materials Science & Engineering A. 802 (2021) 140448.
5.B.J. Wang, D.K. Xu*, T.Y. Zhao, L.Y. Sheng. Effect of CaCl2 and NaHCO3 in physiological saline solution on the corrosion behavior of an as-extruded Mg-Zn-Y-Nd alloy. Acta Metallurgica Sinica (English Letters). 34 (2021) 239-247.
6.Y.X. Qiao, D.K. Xu*, S. Wang, Y.J. Ma, J. Chen. Effect of hydrogen charging on microstructural evolution and corrosion behavior of a Ti-4Al-2V-1Mo-1Fe alloy. J. Mater. Sci. Technol. 60 (2021) 168-176. ESI高被引1%
7.B.N. Du, Z.Y. Hu, L.Y. Sheng, Y.X. Qiao, B.J. Wang, D.K. Xu*, Y.F. Zheng, T.F. Xi. Microstructural Characteristics and Mechanical Properties of the Hot Extruded Mg-Zn-Y-Nd alloy with Different Zn and Y Contents. J. Mater. Sci. Technol. 60 (2021) 44-55. ESI高被引1%
8.C.Q. Li, D.K. Xu*, Z.R. Zhang, E.H. Han. Influence of the lithium content on the negative difference effect of Mg-Li alloys. J. Mater. Sci. Technol. 57 (2020) 138-145.
9.B.J. Wang, D.K. Xu*, X. Cai, Y.X. Qiao, L.Y. Sheng. Anisotropic corrosion behavior of a hot-rolled Mg-8%Li (in wt.%) alloy. J. Mater. Sci. Technol. 53 (2020) 102-111.
10.L.Y. Sheng, B.N. Du, Z.Y. Hu, Y.X. Qiao, Z.P. Xiao, B.J. Wang,  D.K. Xu, Y.F. T.F. Xi, Effects of annealing treatment on microstructure and tensile behavior of the Mg-Zn-Y-Nd alloy. Journal of Magnesium and Alloys. 8 (2020) ‏ 601-613.
11.B.J. Wang, D.K. Xu*, X. Cai, Y.X. Qiao, L.Y. Sheng. Effect of rolling ratios on the microstructural evolution and corrosion performance of an as-rolled Mg-8wt.%Li alloy. Journal of Magnesium and Alloys. 9 (2021) 560-568.
12.Y.X. Qiao, D.K. Xu*, S. Wang, Y.J. Ma, J. Chen, Y.X. Wang, H.L. Zhou. Corrosion and Tensile Behaviors of Ti-4Al-2V-1Mo-1Fe and Ti-6Al-4V Titanium Alloys. Metals. 9 (2019) 1213.
13.C.Q. Li, D.K. Xu*, B.J. Wang, L.Y. Sheng, R.Z. Wu, E.H. Han. Effect of icosahedral phase on the mechanical anisotropy of as-extruded Mg-14Li (in wt.%) based alloys. J. Mater. Sci. Technol. 35 (2019) 2477-2484.
14.B.J. Wang, D.K. Xu*, J. Sun, E.H. Han, Effect of grain structure on the stress corrosion cracking (SCC) behavior of an as-extruded Mg-Zn-Zr alloy. Corrosion Science. 157 (2019) 347-356.
15.B.J. Wang, D.K. Xu*, L.Y. Sheng, E.H. Han, J. Sun. Deformation and fracture mechanisms of an annealing-tailored “bimodal” grain-structured Mg alloy. J. Mater. Sci. Technol., 35 (2019) 2423-2429.  
16.郏义征，赵明君，程世婧，王保杰，王硕，盛立远，许道奎*. 模拟人体体液中镁合金的腐蚀行为研究.中国腐蚀与防护学报. 39(6): 2019: 463-468.
17.郏义征，王保杰，赵明君，许道奎. 固溶处理制度对挤压态Mg-Zn-Y-Nd镁合金在模拟体液中腐蚀和析氢行为的影响规律研究.中国腐蚀与防护学报. 40(4): 2020: 351-357.
18.王保杰，姜春龙，李传强，孙杰，许道奎*. 镁锂合金腐蚀行为研究进展.航空材料学报. 39 (2019) 1-8.
19.王保杰，栾吉瑜，王士栋，许道奎*. 镁合金应力腐蚀开裂行为研究进展. 中国腐蚀与防护学报.39 (2019) 89-95.
20.Cui Lan-Yue, Wei Guang-Bin, Han Zhuang-Zhuang, Zeng Rong-Chang, Wang Lei, Zou Yu-Hong, Li Shuo-Qi, Xu Dao-Kui, Guan Shao-Kang. In vitro corrosion resistance and antibacterial performance of novel tin dioxide-doped calcium phosphate coating on degradable Mg-1Li-1Ca alloy. J. Mater. Sci. Technol., 2019, 35(3): 254-265.
21.Bao-Jie Wang, Ji-Yu Luan, Dao-Kui Xu*, Jie Sun, Chuan-Qiang Li, En-Hou Han. Research Progress on the Corrosion Behavior of Magnesium-Lithium-Based Alloys: A Review. Acta Metallurgica Sinica (English Letters). 32 (2019) 1-9.
22.B.J. Wang, D.K. Xu*, S.D. Wang, L.Y. Sheng, R.C. Zeng, E.H. Han. Influence of solution treatment on the corrosion fatigue behavior of an as-forged Mg-Zn-Y-Zr alloy. International Journal of Fatigue.120 (2019) 46-55. ESI高被引1%
23.B.J. Wang, D.K. Xu*, S.D. Wang, E.H. Han. Fatigue crack initiation of magnesium alloys under elastic stress amplitudes: A review. Front. Mech. Eng. 14 (2019) 113-127.
24.包娜娜，许道奎*，刘春忠. 固溶后的晶粒结构对ZK60镁合金挤压型材力学性能的影响. 金属热处理. 09 (2018) 64-69.
25.S.D. Wang, D.K. Xu*, B.J. Wang, L.Y. Sheng, Y.X. Qiao, E.H. Han & C. Dong. Influence of phase dissolution and hydrogen absorption on the corrosion behavior of Mg-7%Gd-5%Y-1%Nd-0.5%Zr alloy in 3.5 wt.% NaCl solution. Corrosion Science. 142 (2018) 185-200.
26.Z.Y. Ding, L.Y. Cui, R.C. Zeng, Y.B. Zhao, S.K. Guan, D.K. Xu*, C.G. Lin. Exfoliation corrosion of extruded Mg-Li-Ca alloy. Journal of Materials Science & Technology. 34 (2018) 1550-1557.
27.C.Q. Li, D.K. Xu*, X.-B. Chen, B.J. Wang, R.Z. Wu, E.H. Han, N. Birbilis. Composition and microstructure dependent corrosion behaviour of Mg-Li alloys. Electrochimica Acta. 260 (2018) 55-64. ESI高被引1%
28.B.J. Wang, D.K. Xu*, J.H. Dong, X.B. Chen, W. Ke. Effect of corrosion production film on the in vitro degradation behavior of Mg-3%Al-1%Zn (in wt.%) alloy in Hank’s solution. Journal of Materials Science & Technology. 34 (2018) 1756-1764.  
29.B.J. Wang, D.K. Xu*, Y.C. Xin, L.Y. Sheng, E.H. Han. High corrosion resistance and weak corrosion anisotropy of an as-rolled Mg-3Al-1Zn (in wt.%) alloy with strong crystallographic texture. Scientific Reports. 7 (2017) 16014.
30.X.J. Wang, D.K. Xu*, R.Z. Wu, X.B. Chen, Q.M. Peng, L. Jin, Y.C. Xin, Z.Q. Zhang, Y. Liu, X.H. Chen, G. Chen, K.K. Deng, H.Y. Wang. What is going on in magnesium alloys? Journal of Materials Science & Technology. 34 (2018) 245-247.    ESI高被引1% ESI热点论文
31.L.Y. Cui, H.P. Liu, K. Xue, W.L. Zhang, R.C. Zeng, S.Q. Li, D.K. Xu, E.H. Han, S.K. Guan. In Vitro Corrosion and Antibacterial Performance of Micro-Arc Oxidation Coating on AZ31 Magnesium Alloy: Effects of Tannic Acid. Journal of the Electrochemical Society. 165 (2018) 821-829.
32.B.J. Wang, S.D. Wang, D.K. Xu*, E.H. Han. Recent progress in fatigue behavior of Mg alloys in air and aqueous media: A review. Journal of Materials Science & Technology. 33 (2017) 1075-1086.  
33.C.Q. Li, D.K. Xu*, Z.R. Zeng, B.J. Wang, L.Y. Sheng, X.-B. Chen, E.H. Han. Effect of volume fraction of LPSO phases on corrosion and mechanical properties of Mg-Zn-Y alloys. Materials & Design. 121 (2017) 430-441.  
34.G. Chen, X. Zhang, D.K. Xu, D.H. Li, X. Chen, Z. Zhang. Multiaxial ratcheting behavior of zirconium alloy tubes under combined cyclic axial load and internal pressure. Journal of Nuclear Materials. 489 (2017) 99-108.  
35.C.Q. Li, D.K. Xu*, S. Yu, L.Y. Sheng, E.H. Han. “Effect of icosahedral phase on crystallographic texture and mechanical anisotropy of Mg-4%Li alloys”. Journal of Materials Science & Technology. 33 (2017) 475-480.  
36.C.Q. Li, D.K. Xu*, B.J. Wang, L.Y. Sheng, Y.X. Qiao, E.H. Han. Natural ageing responses of duplex structured Mg-Li based alloys. Scientific Reports. 7 (2017) 40078.  
37.C.Q. Li, D.K. Xu*, B.J. Wang, L.Y. Sheng, E.H. Han. Suppressing effect of heat treatment on the Portevin-Le Chatelier phenomenon of Mg-4%Li-6%Zn-1.2%Y alloy. Journal of Materials Science & Technology. 32 (2016) 1232-1238.  
38.D.K. Xu, E.H. Han*, Y.B. Xu. “Effect of long-period stacking ordered phase on microstructure and mechanical properties of Mg alloys: A review”. Progress in Natural Science. 26 (2016) 117-128.  
39.S.D. Wang, D.K. Xu*, B.J. Wang, L.Y. Sheng, E.H. Han & C. Dong. “Effect of solution treatment on stress corrosion cracking behavior of an as-forged Mg-Zn-Y-Zr alloy”. Scientific Reports. 6 (2016) 29471.
40.S.D. Wang, D.K. Xu*, B.J. Wang, L.Y. Sheng, E.H. Han & C. Dong. “Effect of solution treatment on the fatigue behavior of an as-forged Mg-Zn-Y-Zr alloy”. Scientific Reports. 6 (2016) 23955.
41.B.J. Wang, D.K. Xu*, J.H. Dong, W. Ke. “Effect of texture on biodegradable behavior of an as-extruded Mg-3%Al-1%Zn alloy in phosphate buffer saline medium”. Journal of Materials Science & Technology. 32 (2016) 646-652.
42.G. Chen, Y. Zhang, D.K. Xu, Y.C. Lin, X. Chen. “Low cycle fatigue and creep-fatigue interaction behavior of nickel-base superalloy GH4169 at elevated temperature of 650 °C”. Materials Science and Engineering A. 655 (2016) 175-182.
43.J.G. Ren, L. Wang, D.K. Xu, L.Y. Xie, Z.C. Zhang. Analysis and Modeling of Friction Stir Processing-Based Crack Repairing in 2024 Aluminum Alloy. Acta Metallurgica Sinica (English Letters). 30 (2017) 228-237.
44.D.K. Xu*, C.Q. Li, B.J. Wang, E.H. Han. “Effect of icosahedral phase on the crystallographic texture and mechanical anisotropy of duplex structured Mg-Li alloys”. Materials & Design. 88 (2015) 88-97.
45.S.D. Wang, D.K. Xu*, B.J. Wang, E.H. Han, C. Dong. “Effect of corrosion attack on the fatigue behavior of an as-cast Mg-7%Gd-5%Y-1%Nd-0.5%Zr alloy”. Materials & Design. 84 (2015) 185-193.
46.C.Q. Li, D.K. Xu*, T.T. Zu, E.H. Han, L. Wang. “Effect of temperature on the mechanical abnormity of the quasicrystal reinforced Mg-4%Li-6%Zn-1.2%Y alloy”. Journal of Magnesium and Alloys. 3 (2015) 106-111.  
47.D.K. Xu*, B.J. Wang, C.Q. Li, T.T. Zu, E.H. Han. “Effect of icosahedral phase on the thermal stability and ageing response of a duplex structured Mg-Li alloy”. Materials & Design. 69 (2015) 124-129.
48.S.D. Wang, D.K. Xu*, X.B. Chen, E.H. Han, C. Dong. “Effect of heat treatment on the corrosion resistance and mechanical properties of an as-forged Mg-Zn-Y-Zr alloy”. Corrosion Science. 92 (2015) 228-236.
49.D.K. Xu, E.H. Han. “Effect of Yttrium Content on the Ultra-high Cycle Fatigue Behavior of Mg-Zn-Y-Zr alloys”. Materials Science Forum. 816 (2015) 333-336.
50.S.D. Wang, D.K. Xu*, E.H. Han, C. Dong. “Stress corrosion cracking susceptibility of a high strength Mg-7%Gd-5%Y-1%Nd-0.5%Zr alloy”. Journal of Magnesium and Alloys. 2 (2014) 335-341.
51.B.J. Wang, D.K. Xu*, J.H. Dong, W. Ke. “Effect of the crystallographic orientation and twinning on the corrosion resistance of an as-extruded Mg-3Al-1Zn (wt.%) bar”. Scripta Materialia. 88 (2014) 5-8.
52.D.K. Xu, P.A. Rometsch, L. Li, L.M. Shen, N. Birbilis. “Critical conditions for the occurrence of quench cracking in an Al-Zn-Mg-Cu alloy”. Journal of Materials Science. 2014 (49) 4687-4697.
53.D.K. Xu*, E.H. Han. “Effect of quasicrystalline phase on improving the corrosion resistance of a duplex structured Mg-Li alloy”. Scripta Materialia. 2014 (71) 21-24.
54.D.K. Xu*, E.H. Han. “Relationship between fatigue crack initiation and activated {10-12} twins in as-extruded pure magnesium”. Scripta Materialia. 2013 (69) 702-705.
55.D.K. Xu*, T.T. Zu, M. Yin, E.H. Han. “Mechanical properties of the icosahedral phase reinforced duplex Mg-Li alloy both at room and elevated temperatures”. Journal of Alloys and Compounds. 2013 (582) 161-166.
56.Y.B. Xu, D.K. Xu, X.H. Shao, E.H. Han. “Guinier-Preston Zone, Quasicrystal and Long-period Stacking Ordered Structure in Mg-based Alloys, A Review”. Acta Metallurgical Sinica-English letters. 2013 (26) 217-231.
57.D.K. Xu, E.H. Han. “Effects of icosahedral phase formation on the microstructure and mechanical improvement of Mg alloys: A review”. Progress in Natural Science: Materials International. 2012 (22) 364-385.
58.D.K. Xu*, N. Birbilis and P.A. Rometsch. “Effect of S-phase dissolution on the corrosion and stress corrosion cracking of an as-rolled Al-Zn-Mg-Cu Alloy”. Corrosion. 68 (2012) 1-10.
59.D.K. Xu*, P.A. Rometsch and N. Birbilis. “Optimization of solution treatment for an as-rolled Al-Zn-Mg-Cu alloy. Part I. Overheating issues of constituent particles”. Material Science and Engineering A. 534 (2012) 234-244.
60.D.K. Xu*, P.A. Rometsch and N. Birbilis. “Optimization of solution treatment for an as-rolled Al-Zn-Mg-Cu alloy. Part II. Microstructural evolution and mechanical improvement”. Material Science and Engineering A. 534 (2012) 244-252.
61.D.K. Xu*, N. Birbilis and P.A. Rometsch. “The effect of pre-ageing temperature and retrogression heating rate on the strength and corrosion behaviour of AA7150”. Corrosion Science. 54 (2012) 17-25.
62.D.K. Xu*, N. Birbilis, D. Lashansky, P.A. Rometsch and B.C. Muddle. “Effect of solution treatment on the corrosion behaviour of aluminium alloy AA7150: optimisation for corrosion resistance”. Corrosion Science. 53 (2011) 217-225.
63.L.J. Wang, D.K. Xu, P.A. Rometsch, S.X. Gao, Y. Zhang, Z.B. He, M.J. Couper, B.C. Muddle. “Effect of homogenisation parameters on dissolution and precipitation in aluminium alloy AA7150”. Materials Science Forum. 693 (2011) 276-281.
64.D.K. Xu*, P.A. Rometsch, H. Chen and B.C. Muddle. “Influence of Solution Treatment on Microstructure and Quench Cracking in a Water-Quenched Aluminium Alloy 7150”. Materials Science Forum. 654-656 (2010) 934-937.
65.J. Ma, B. Zhang, D.K. Xu, E.H. Han and W. Ke. “Effects of inclusion and loading direction on the fatigue behavior of hot rolled low carbon steel”. International Journal of Fatigue. 7 (2010) 1116-1125.
66.D.K. Xu, En-Hou Han, L. Liu and Y.B. Xu. “Influence of Higher Zn/Y Ratio on the Microstructure and Mechanical Properties of Mg-Zn-Y-Zr Alloys”. Metallurgical and Materials Transactions A. 40A (2009) 1727-1740.
67.D.K. Xu, L. Liu, Y.B. Xu and E.H. Han. “The micro-mechanism of fatigue crack propagation for a forged Mg-Zn-Y-Zr alloy in the gigacycle fatigue regime”. Journal of Alloys and Compounds. 454 (2008) 123-128.
68.D.K. Xu, L. Liu, Y.B. Xu and E.H. Han. “The fatigue behavior of I-phase containing as-cast Mg-Zn-Y-Zr alloy”. Acta Materialia. 56 (2008) 985-994.
69.D.K. Xu, L. Liu, Y.B. Xu and E.H. Han. “The relationship between macro fracture modes and roles of different deformation mechanisms for the as-extruded ZK60 Mg alloy”. Scripta Materialia. 58 (2008) 1098-1101.
70.D.K. Xu, L. Liu, Y.B. Xu and E.H. Han. “The Influence of Developed Texture on the Mechanical Anisotropy and Deformation Modes of an As-extruded Mg-Zn-Zr Mg Alloy”. Materials Transactions. 49 (2008) 1011-1014.
71.D.K. Xu, W.N. Tang, L. Liu, Y.B. Xu and E.H. Han. “Effect of W-phase on the mechanical properties of as-cast Mg-Zn-Y-Zr alloys”. Journal of Alloys and Compounds. 461 (2008) 248-252.
72.D.K. Xu, L. Liu, Y.B. Xu and E.H. Han. “The crack initiation mechanism of the forged Mg-Zn-Y-Zr alloy in the super-long fatigue life regime”. Scripta Materialia. 56 (2007) 1-4.
73.D.K. Xu, L. Liu, Y.B. Xu and E.H. Han. “Effect of microstructure and texture on the mechanical properties of the as-extruded Mg-Zn-Y-Zr alloys”. Materials Science and Engineering A. 443 (2007) 248-256.
74.D.K. Xu, W.N. Tang, L. Liu, Y.B. Xu and E.H. Han. “Effect of Y concentration on the microstructure and mechanical properties of as-cast Mg-Zn-Y-Zr alloys”. Journal of Alloys and Compounds. 432 (2007) 129-134.
75.D.K. Xu*, L. Liu, Y.B. Xu and E.H. Han. “The fatigue crack propagation behavior of the forged Mg-Zn-Y-Zr alloy”. Journal of Alloys and Compounds. 431 (2007) 107-111.
76.D.K. Xu*, L. Liu, Y.B. Xu and E.H. Han. “The strengthening effect of icosahedral phase on the as-extruded Mg-Li alloys”. Scripta Materialia. 57 (2007) 285-288.
77.D.K. Xu, L. Liu, Y.B. Xu and E.H. Han. “Ultra-high cycle fatigue behavior of the as-extruded magnesium alloy ZK60”. Acta Metallurgica Sinica.  43 (2007) 144-148.
78.D.K. Xu, W.N. Tang, L. Liu, Y.B. Xu, E.H. Han. “The fatigue crack propagation (FCP) behavior of the forged Mg-Zn-Y-Zr alloy”. Materials Science Forum. 546-549 (2007) 343.
79.R.S. Chen, W.N. Tang, D.K. Xu and E.H. Han. “Development of a high strength Mg-Zn-Y-Zr wrought alloy”. Materials Science Forum. 539-543 (2007) 1701.
80.W.N. Tang, D.K. Xu, R.S. Chen and E.H. Han. “Superplastic Behavior of an Extruded Mg-Zn-Y-Zr Alloy”. Materials Science Forum. 546-549 (2007) 337.
81.D.K. Xu*, L. Liu, Y.B. Xu and E.H. Han. “The effect of precipitates on the mechanical properties of ZK60-Y alloy”. Materials Science and Engineering A. 420 (2006) 322-332.
82.D.K. Xu*, L. Liu, Y.B. Xu and E.H. Han. “The influence of element Y on the mechanical properties of the as-extruded Mg-Zn-Y-Zr alloys”. Journal of Alloys and Compounds. 426 (2006) 155-161.
83.D.K. Xu, L. Peng, L. Liu, Y.B. Xu. “Influence of heat treatments on the mechanical properties of forged ZK60-Y magnesium alloy”. Chinese Journal of Materials Research. 19 (2005) 573-580.
84.许道奎*，李传强，韩恩厚，王磊. “金属材料中“塑性不稳定现象”的研究进展.” 中国材料进展. 35 (2016) 219-226.
85.李传强，许道奎*，韩恩厚，王磊. “镁合金塑性变形过程中锯齿屈服现象的研究进展” 中国材料进展. 35 (2016) 11-15.
86.H.W. Shi, E.H. Han, F.C. Liu, T. Wei, Z.W. Zhu, D.K. Xu. Study of corrosion inhibition of coupled Al2Cu-Al and Al3Fe-Al by cerium cinnamate using scanning vibrating electrode technique and scanning ion-selective electrode technique. Corrosion Science. 98 (2015) 150-162.  
87.B.N. Du, Z.Y. Hu, L.Y. Sheng, D.K. Xu, Y.F. Zheng, T.F. Xi. Influence of Zn Content on Microstructure and Tensile Properties of Mg-Zn-Y-Nd Alloy. Acta Metallurgica Sinica - English Letters. 2018 (31) 351-361.
88.B.N. Du, Z.P. Xiao, Y.X. Qiao, L. Zheng, B.Y. Yu, D.K. Xu, L.Y. Sheng. Optimization of microstructure and mechanical property of a Mg-Zn-Y-Nd alloy by extrusion process. Journal of Alloys and Compounds. 775 (2019) 990-1001.
89.L.Y. Sheng, B.N. Du, B.J. Wang, D.K. Xu, C. Lai, Y. Gao, T.F. Xi. Hot Extrusion Effect on the Microstructure and Mechanical Properties of a Mg-Y-Nd-Zr Alloy. Strength of Materials. 2018 (50) 184-192.  
90.X.B. Chen, C.Q. Li, D.K. Xu. Biodegradation of Mg-14Li alloy in simulated body fluid: A proof-of concept study. Bioactive Materials. 2018 (3) 110-117.
91.刘洪亮，沙桂英，尹淼，许道奎，韩恩厚，吴燕山. “Mg-2.9Li-1.2Y-6.2Zn合金的拉伸性能及其加载速率效应.” 轻合金加工技术. 10 (2014) 50-53.
92.沙桂英，尹淼，韩恩厚，许道奎，徐永波，于爽. “Mg-4.3Li-1.08Y-5.83Zn合金的微观组织与塑性不稳定性研究.” 兵工学报. 38 (2017) 534-539.
93.于爽，沙桂英，许道奎，李传强，添加 Zn、Y对Mg-7Li合金变形行为及应变率效应的影响，轻合金加工技术，2017,45(11),63-67.  
蔡祥，乔岩欣，许道奎，李传强，杨兰兰，周慧玲，镁锂合金强化行为研究进展，材料导报，2019，133 （72）374-379.